Ansel Pan/Tilt & Dome Type Installationsanleitung Seite 1

Multi-Profile Network Cameras: Pan/Tilt, Dome & Box Type Quick Start Guide 2008 May

Ceiling Mount 1. Fix the camera to L-type bracket with the two supplied screws 2. Fix the bracket and camera to the ceiling using two holly wall

2.4 Box IP Camera Installation Connections: Audio Output Jack Audio-out Jack allows this device to output audio for two-way communication or a

External Microphone The Camera also supports external microphone. User can plug in an external microphone to pick up voice more. Local Video Output

4. Connect the external power supply to Camera Connect the attached power adapter to the DC power jack of the camera. Note: Use the power adapter, 12V

14installed network devices. User can step by step to setup IP address, username and password. Username and Password: The networked devices

15new IP Address during configuration. 4. 3G Mobile Phone (3GPP) Usage The device is 3GPP compatible by default. To view live video over 3GPP,

16 Where host is the host name or IP address of the camera, and N is the number of the profile (between 2 and 3) for the video stream. Step 4-2: Fo

Table of Contents 1. System Requirements...3 2. Physical I

About multi-profile Multi-profile stands for simultaneously video streams. The Network Camera can generate MPEG4 and MJPEG streaming simultaneously to

1. RJ45 LAN socket: Connect to PC or Hub/Switch. For connections to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port bu

2.1 Indoor IP Dome Camera Installation 1. Drill 20mm (3/4") holes in the ceiling or wall and then align the mounting plate to the holes you h

5. Connect the necessary cables and connectors: - Plug-in Ethernet Cable into LAN port (necessary) - Co

2.2 Vandal IP Dome Camera Installation 1. Use the provided L-wrench, loosen the vandal-resistant housing cover (with screws still attached on the cov

6. Connect the LAN cable to Ethernet’s switch or hub, the video cable to video output to the monitor or other video device through a 75 Ohms type co

2.3 P/T IP Camera Installation Connections: Audio Output Jack It allows this device to output audio or alerting sound. Connect with a 3.5Ø phone