Ansel Pan/Tilt & Dome Type Installationsanleitung PDF herunterladen (Seite 13)

4. Connect the external power supply to Camera

Connect the attached power adapter to the DC power jack of the camera. Note: Use the

power adapter, 12VDC, included in the package and connect it to wall outlet for AC power.

Once you have installed the camera well and powered it on, the power LED will turn on. It

means the system is booting up successfully. Furthermore, if you have a proper network

connection, and access to the camera, the LED will flash green under wired mode.

5. Done

3. Camera administration

When you installed your networked device over your network environment, to start Network

Camera web configuration, you must have the web browsers installed on computer for web

management.

- Microsoft internet Explorer 6.0 or higher

At first, user may use “IP Wizard” utility to search all networked devices in the LAN.

Use “IP Wizard” to locate IP address

Press “Search” button. IP Wizard will list all networked devices in the LAN:

Wizard function:

The utility featured with “Wizard” function to help user to modify the IP parameters of the

Power

Cable

1 2 ... 8 9 10 11 12 13 14 15 16

Keine Kommentare

Ansel Pan/Tilt & Dome Type Installationsanleitung Seite 13